Is bigger always better? No! For many years, if you wanted a big system, you needed big products. Not anymore. Introducing Phantom amplifiers for 2011. Using state of the art SMT and Class D technologies, you can now have a system as big as you want, and still not sacrifice all your storage area. These new big amps in a tiny chassis are available in 1, 2, 4 and 5 channel models to fit every application...
- Class D Full Range SMT Circuitry
- Double Sided Composite Epoxy PCB
- 2-Ohm Stereo, 4-Ohm Bridged Multi-Channel
- 1-Ohm Stable Class D Monoblock
- Three-Way Protection Circuitry
- Delayed On/Off Circuit
- Tri-Mode Capable (2/4/5 ch. models)
- Variable 12dB High, Low, & Subsonic Crossovers
- Band-Pass Crossovers (4ch & 5ch.)
- Input Source Selector (4ch. & 5ch.)
- Variable 12dB 50Hz Bass Boost (1ch.)
- Dash Mounted Remote Gain Control (5ch. & 1 ch.)
- Direct Wire 8ga. Power & Speaker Terminals
- 0ga Reducer Terminal Included
| Phantom | P600.2 | P900.4 | P900.5 | P1000.1 |
| Channels | 2 ch. Class D | 4 ch. Class D | 5 ch. Class D | 1 ch. Class D |
| RMS Power 4Ω | 190 x 2 | 145 x 4 | 70 x4 & 270 x 1 | 580 |
| RMS Power 2Ω | 300 x 2 | 225 x 4 | 115 x 4 & 440 x 1 | 725 |
| RMS Power 4Ω Bridged | 600 x 1 | 450 x 2 | 230 x 2 & 440 x 1 | - |
| RMS Power 1Ω | - | - | - | 1,000 |
| Remote Gain Control | - | - | Yes | Yes |
| Dimensions (6.5"w x 2"h) | 6.125" | 9.25" | 11.5" | 11.5" |
