Woven Fiberglass Composite Cone

All Phantom subwoofers use fiberglass stranding woven together for ultimate strength and less elasticity. A heavy soaking in epoxy combined with the sonic qualities of pulp paper backing proves itself worthy of any system.

100% OFC 4-Layer Voice Coil

Phantom subwoofers use generous 1.50" long, 2.5" diameter 100% OFC Copper voice coils. A vented Aluminum former extract and dissapate any heat build-up, resulting in improved power handling.

Extended Excursion Polyurethane Surround

Polyurethane is a foam compound used in the manufacture of countless gasket and insulation products, known for its adhesive bonding properties. Phantom subwoofers utalize an extended excursion polyurethane surround for strength and flexiabiity during extreme movement.

Back Plate & T-Yoke Venting

Heat build-up is a leading cause of catastrophic woofer failure. Venting built into the T-Yoke, back plate, and voice coil extract and dissapate heat, ensuring Phantom subwoofers keep their cool.

PHANTOM PH.10 PH.12 PH.15 PHANTOM-13
RMS Power (watts) 700 800 900 200
Efficiency (1w/1m dB) 82.95dB 85.80dB 88.45dB 80.82dB
Voice Coil Configuration 2.50" DVC 2Ω 2.50" DVC 2Ω 2.50" DVC 2Ω 5.00" SVC 4Ω
Mounting Depth 5.875" 6.00" 6.875" 2.00"
Optimum Sealed ft3 1 1.5 2.75 0.75
Optimum Ported ft3 1.5 2.25 2.75 N/A