ICE2200.5 Amplifier

Black Ice Series 5Ch Power Amplifier
RMS Power 4Ω 90W x 4 + 380W(14.4V,1KHz,35Hz ≤1%THD+N)
RMS Power 2Ω 135W x 4 + 560W(14.4V,1KHz,35Hz ≤1%THD+N)
RMS Bridged 4Ω 270W x 2 + 560W (14.4V,1KHz,35Hz ≤1%THD+N)

Category: Tags: , ,

Description

Precision Power is proud to present the boldest generation of amplifiers, Black Ice. Over compensated high headroom power supplies are capable of producing more than conventional power gain. Selected models accept a balanced signal for the purest sound. Furthermore, double-sided PCBs with all surface mount technology enhance the quality of your listening experience.

With selected models handling .5-Ohm minimum impedance, Black Ice is sure to give you PLENTY of bass while still looking respectable doing it! Grey finish with an appropriate solid chassis, how could you go wrong!

Specifications

Double Sided PCB Black Ice Amplifiers

2-Ohm Stereo, 4-Ohm Bridged Full Range Operation

Direct Short, Thermal, Overload Circuit – Protection

Tri-Mode Capable (2/3/5Ch Models)

Variable 12dB High, Low  & Subsonic Crossovers

Variable 12dB Band-Pass Crossover (2Ch. & 5Ch.)

Direct 4ga. Power & 12ga. Speaker Terminals

Amplifier Dimensions: 8.25″W x 2.25″H x 17″L

Dash Mounted Gain Controller Included 

Support

Black Ice Amplifiers Owner’s Manual (.pdf)

Black Ice Amplifiers Cut Sheet (.png)

Warranty Procedure 

Please complete the entire Return Authorization Request Form. Read carefully and fill out all the information accordingly. For non-warranty repairs, please provide details of the problem and request an estimate before sending the product. After receiving and approving your completed request, Precision Power will issue a Return Authorization (RA) Number, which will be forwarded to you via e-mail.

Dealer Locator

      Related products

      • In 2021, ATOM amplifiers adopt an adequate Class D performance, reliability, and footprint of the original ATOM and iOn platforms. At first glance, you’ll notice several key improvements. Atom’s signal inputs, power/ground, and speaker connections are all relocated to the chassis’s leading-edge for a more comfortable, more appealing install. All pre-amp & crossover options are conveniently located on the backside. You might not notice additions to the circuit board, including improved power supply & output stage components & monoblock bridging capability. The installation of ATOM amplifiers is unique, using mounting pedestals at each corner. The pedestals elevate the heatsink, improving airflow around and underneath the chassis. Additionally, rubber grommets under and inside each pedestal electrically isolate the amplifier chassis from the vehicle chassis, reducing the potential for ground loop noise.

        A1000.5D Amplifier

        ATOM Series 5Ch Digital Power Amplifier
        RMS Power 4Ω 60W x 4+250W (14.4V,1KHz, 35Hz ≤1% THD+N)
        RMS Power 2Ω 100W x 4+450W (14.4V,1KHz, 35Hz ≤1% THD+N)
        RMS Bridged 4Ω 200W x 2+450W (14.4V,1KHz, 35Hz ≤1% THD+N)

      • PC1800.1D Amplifier

        PowerClass Vertical Subwoofer Amplifier
        RMS Power 4Ω 500W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
        RMS Power 2Ω 1,000W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
        RMS Power 1Ω 1,800W x 1 (14.4V, 35Hz, ≤ 1% THD+N)

      • i450.1 Amplifier

        Compact iON Series Subwoofer Amplifier
        RMS Power 4Ω 260W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
        RMS Power 2Ω 450W x 1 (14.4V, 35Hz, ≤ 1% THD+N)

      • i1000.4 Amplifier

        Compact iON Series 4Ch Amplifier
        RMS Power 4Ω 140W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
        RMS Power 2Ω 250W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
        RMS Bridged 4Ω 500W x 2 (14.4V, 1KHz, ≤ 1% THD+N)