ICE5000.1D Amplifier

Black Ice Series Subwoofer Power Amplifier – Strap Bridge-Mode Ready (Master/Slave)
RMS Power 4Ω 1,200W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
RMS Power 2Ω 1,700W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
RMS Power 1Ω 2,500W x 1 (14.4V, 35Hz, ≤ 1% THD+N)

Category: Tags: , ,

Description

Precision Power is proud to present the boldest generation of amplifiers, Black Ice. Selected models accept a balanced signal for the purest sound. Over compensated high headroom power supplies are capable of producing more than conventional power gain. Furthermore, double-sided PCBs with all surface mount technology enhance the quality of your listening experience.

With selected models handling .5-Ohm minimum impedance, Black Ice is sure to give you PLENTY of bass while still looking respectable doing it! Grey finish with an appropriate solid chassis; how could you go wrong!

Specifications

Double Sided PCB Black Ice Amplifiers

1 – Ohm Mono Stable

Direct Short, Thermal, Overload Circuit – Protection

Tri-Mode Capable (2/3/5Ch Models)

Variable 12dB Low  & Subsonic Crossovers

12dB Bass Boost Increases Low Octave Harmonics

Direct 4ga. Power & 8ga. Speaker Terminals

Amplifier Dimensions: 8.25″W x 2.25″H x 17″L

Dash Mounted Gain Controller Included 

Support

Black Ice Amplifiers Owner’s Manual (.pdf)

Black Ice Amplifiers Cut Sheet (.png)

Warranty Procedure 

Please complete the entire Return Authorization Request Form. Read carefully and fill out all the information accordingly. For non-warranty repairs, please provide details of the problem and request an estimate before sending the product. After receiving and approving your completed request, Precision Power will issue a Return Authorization (RA) Number, which will be forwarded to you via e-mail.

Dealer Locator

      Related products

      • ICE1600.4 Amplifier

        Black Ice Series 4Ch Power Amplifier
        RMS Power 4Ω 130W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
        RMS Power 2Ω 200W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
        RMS Bridged 4Ω 400W x 2 (14.4V, 1KHz, ≤ 1% THD+N)

      • In 2021, ATOM amplifiers adopt an adequate Class D performance, reliability, and footprint of the original ATOM and iOn platforms. At first glance, you’ll notice several key improvements. Atom’s signal inputs, power/ground, and speaker connections are all relocated to the chassis’s leading-edge for a more comfortable, more appealing install. All pre-amp & crossover options are conveniently located on the backside. You might not notice additions to the circuit board, including improved power supply & output stage components & monoblock bridging capability. The installation of ATOM amplifiers is unique, using mounting pedestals at each corner. The pedestals elevate the heatsink, improving airflow around and underneath the chassis. Additionally, rubber grommets under and inside each pedestal electrically isolate the amplifier chassis from the vehicle chassis, reducing the potential for ground loop noise.

        A1000.5D Amplifier

        ATOM Series 5Ch Digital Power Amplifier
        RMS Power 4Ω 60W x 4+250W (14.4V,1KHz, 35Hz ≤1% THD+N)
        RMS Power 2Ω 100W x 4+450W (14.4V,1KHz, 35Hz ≤1% THD+N)
        RMS Bridged 4Ω 200W x 2+450W (14.4V,1KHz, 35Hz ≤1% THD+N)

      • ICE1300.1D Amplifier

        Black Ice Series Subwoofer Power Amplifier – Strap Bridge-Mode Ready (Master/Slave)
        RMS Power 4Ω 300W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
        RMS Power 2Ω 450W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
        RMS Power 1Ω 650W x 1 (14.4V, 35Hz, ≤ 1% THD+N)

      • i1000.4 Amplifier

        Compact iON Series 4Ch Amplifier
        RMS Power 4Ω 140W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
        RMS Power 2Ω 250W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
        RMS Bridged 4Ω 500W x 2 (14.4V, 1KHz, ≤ 1% THD+N)