Bass (Before Amp) Restoration Processor/Maximizer
BP.8 Bass Processor
Description
They say music soothes the soul, but poor control of your system can kill the harmonics of a beautiful song or road trip. If you want to extend great-sounding music from your source to your amps, then get yourself a Precision Power Digital Bass Reconstruction Processor.
The BP.8 digitally maximizes the ultra-low bass on all types of recorded material. The processor detects bass harmonics, then digitally recreates the original essentials for the incredible punch and impact of live music. You get more bass!
Features
SWEEP
selects the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music.
WIDTH
increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency.
OUTPUT VOLTAGE
is the amount of boost level. Your instincts might be to choose 10V because why not, but hold on a second… more isn’t necessarily better. In this case, more can be dangerous, potentially damaging your subwoofers.
MAX BASS INDICATOR
lights above the equalizer controls are a visual representation of the boost level. Bright, continuous illumination indicates maximum bass enhancement levels have been relinquished. Remember, more isn’t necessarily better…
DASH MOUNT CONTROL
included with this processor can be mounted anywhere in the vehicle, but near the driver seat is recommended.
Specifications
Bass Expander Signal Processor
Variable 27-63Hz Bass EQ
Variable Boost Q
Boost Voltage Limitation Control
Selectable 35, 50, 80Hz Subsonic Filter
10V Max Line Driver
Balanced Signal Inputs, Up To 15 Volts
Selectable Signal Grounding Mode
Selectable Ground Isolation
Dash Mount Remote Gain Control
THD: .003%
S/N Ratio: 130dB
Support
Warranty Procedure
Please complete the entire Return Authorization Request Form. Read carefully and fill out all the information accordingly. For non-warranty repairs, please provide details of the problem and request an estimate before sending the product. After receiving and approving your completed request, Precision Power will issue a Return Authorization (RA) Number, which will be forwarded to you via e-mail.
Dealer Locator
[wpsl template=”default” map_type=”roadmap” auto_locate=”true” start_marker=”blue” store_marker=”dark-orange” category=”” category_selection=””]
Related products
-
5-Band Parametric Equalizer w/ LED Display
This EQ takes your input signal and allows you to alter and adjust the sound to your liking. The output signal is then delivered via the high voltage (up to 8.5V) pre-amp RCA outputs for the Front, Rear, and Subwoofer channels (Subwoofer output channel features an independent volume control knob on the face of the unit as well).
-
1/2 DIN 3 & 4 Band Dual-Zone Equalizer
Featuring two sets of RCA inputs (main and a selectable auxiliary input), this EQ takes your input signal and allows you to alter and adjust the sound to your liking. The output signal is then delivered via the high voltage (up to 7V max) pre-amp RCA outputs for the Front, Rear, and Subwoofer channels (the subwoofer out-put channel features an independent volume control knob on the face of the unit as well).
-
-
31-Band Digital Signal Processor
Digital signal processors have become popular amongst sound quality enthusiasts recently. Although they generate near the audiophile-grade sound, they tend to be difficult to program, and downright confusing. To remedy this conundrum, Precision Power introduces DSP-88R, a user-friendly DIY DSP that offers the features and performance you need.
